Since 1985  THERMA-COTE, INC. has manufactured high quality coatings for distributers in the commercial/industrial fields as well as our own trademarked brand ThermaCote®.  Tested and trusted for use on all roofing systems including asphalt shingle roofs, walls, whole building interiors/exteriors, mobile classrooms and homes, or use as a primer/topcoat on sheetrock, plastic, concrete, steel, and wood.  ThermaCote® can also be used for storage tanks, silos, R/V and camper tops, cars, trucks, buses, glass, skylights, steel beams and framing for control of hot/cold transmission into interiors (Thermal Bridging), railroad cars, boat interior hulls for control of condensation, and race cars to avoid drivers being burnt by heat transferring from the engine and transmission compartments.

ThermaCote® has been successfully used for control of corrosion as well as controlling corrosion under insulation.  When extraordinary hot or cold transference presents a problem that typical procedures don’t address, think ThermaCote®!

ThermaCote® the Ultimate Thermal Envelope for All Structures:

• ENERGY STAR PARTNER & QUALIFIED / RATED PRODUCT
• MAS Certified Green: Passes California Indoor Air Quality Standards for both Classrooms and Offices
• UL® CLASSIFIED: 0 Flame Spread / 5 smoke development
• CRRC Qualified product: Cool Roofs Rating Council
• ULTRA LOW VOC’s: Water based latex acrylic formulation that is friendly to environments inside and out.  Only 0.0099 lbs per gallon /1.186 grams/liter
• SELF-PRIMING: Built in rust/corrosion inhibitors make it self-priming in most cases.